X11 INPUT SYNTHESIS EXTENSION PROPOSAL

X Consortium Standard

Larry Woestman

   Member of Technical Staff
   Hewlett Packard

   Version 1.0

   Copyright  1993 X Consortium

   Permission is hereby granted, free of charge, to any person
   obtaining a copy of this software and associated documentation
   files (the "Software"), to deal in the Software without
   restriction, including without limitation the rights to use,
   copy, modify, merge, publish, distribute, sublicense, and/or
   sell copies of the Software, and to permit persons to whom the
   Software is furnished to do so, subject to the following
   conditions:

   The above copyright notice and this permission notice shall be
   included in all copies or substantial portions of the Software.

   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
   OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
   NONINFRINGEMENT. IN NO EVENT SHALL THE X CONSORTIUM BE LIABLE
   FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
   OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
   CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
   THE SOFTWARE.

   Except as contained in this notice, the name of the X
   Consortium shall not be used in advertising or otherwise to
   promote the sale, use or other dealings in this Software
   without prior written authorization from the X Consortium.

   X Window System is a trademark of The Open Group.

   This is a proposal for an extension to the X11 server and Xlib.
     __________________________________________________________

   Table of Contents

   Introduction
   Conventions Used In This Document
   Definition Of Terms

        Input Actions
        User Input Actions

   What Does This Extension Do?
   Functions In This Extension

        High Level Functions
        Low Level Functions

Introduction

   This is a proposal for an extension to the X11 server and Xlib.
   It provides two capabilities:
     * It allows a client to generate user input actions in the
       server without requiring a user to be present.
     * It also allows a client to control the handling of user
       input actions by the server.

   The capability to allow a client to generate user input actions
   in the server will be used by some of the X Testing Consortium
   Xlib tests. Both capabilities will be used by the X Testing
   Consortium client exerciser program. These capabilities may
   also be useful in other programs.

   This extension requires modification to device-dependent code
   in the server. Therefore it is not a 'portable' extension as
   defined by the X11 Server Extensions document. However, the
   majority of the code and functionality of this extension will
   be implementation-independent.

Conventions Used In This Document

   The naming conventions used in the Xlib documentation are
   followed with these additions:
     * The names of all functions defined in this extension begin
       with 'XTest', with the first letter of each additional word
       capitalized.
     * The names of the protocol request structures follow the
       Xlib convention of 'x<name>Req'.
     * The names of the protocol request minor type codes follow
       the Xlib convention of 'X_<name>'.
     * The names of all other constants defined in this extension
       begin with 'XTest', with the rest of the name in upper case
       letters.
     * All constants and structures defined in this extension will
       have their values specified in the 'xtestext1.h' file
       (listed in section 5).

Definition Of Terms

Input Actions

   Input actions are pointer movements, button presses and
   releases, and key presses and releases. They can be generated
   by a user or by a client (using functions in this extension).

User Input Actions

   User input actions are input actions that are generated by the
   user moving a pointing device (typically a mouse), pressing and
   releasing buttons on the pointing device, and pressing and
   releasing keys on the keyboard.

What Does This Extension Do?

   Without this extension, user input actions are processed by the
   server, and are converted into normal X events that are sent to
   the appropriate client or clients.

   This extension adds the following capabilities:
     * Input actions may be sent from a client to the server to be
       processed just as if the user had physically performed
       them. The input actions are provided to the server in the
       form of X protocol requests defined by this extension. The
       information provided to the server includes what action
       should be performed, and how long to delay before
       processing the action in the server.
     * User input actions may be diverted to a client before being
       processed by the server. The effect on the server is as if
       the user had performed no input action. The user input
       actions are provided to the client in the form of X events
       defined by this extension. The information provided to the
       client includes what user input action occurred and the
       delay between this user input action and the previous user
       input action. The client may then do anything it wishes
       with this information.
     * User input actions may be copied, with one copy going to
       the server in the normal way, and the other copy being sent
       to a client as described above.

Functions In This Extension

High Level Functions

   These functions are built on top of the low level functions
   described later.

XTestMovePointer

   int XTestMovePointer(Display *display, int device_id, unsigned
   long delay, int x, int y, unsigned int count);

   display

   Specifies the connection to the X server.

   device_id

   Specifies which pointer device was supposed to have caused the
   input action. This is a provision for future support of
   multiple (distinguishable) pointer devices, and should always
   be set to 0 for now.

   delay

   Specifies the time (in milliseconds) to wait before each
   movement of the pointer.

   x, y

   Specifies the x and y coordinates to move the pointer to
   relative to the root window for the specified display.

   count

   Specifies the number of 'delay, x, y' triplets contained in the
   delay, x and y arrays.

   The XTestMovePointer function creates input actions to be sent
   to the the server. The input actions will be accumulated in a
   request defined by this extension until the request is full or
   the XTestFlush function is called. They will then be sent to
   the server. When the input actions are sent to the server, the
   input actions will cause the server to think that the pointer
   was moved to the specified position(s), with the specified
   delay before each input action.

   The XTestMovePointer function will return -1 if there is an
   error, and 0 otherwise.

XTestPressButton

   int XTestPressButton(Display *display, int device_id, unsigned
   long delay, unsigned int button_number, unsigned int
   button_action);

   display

   Specifies the connection to the X server.

   device_id

   Specifies which button device was supposed to have caused the
   input action. This is a provision for future support of
   multiple (distinguishable) button devices, and should always be
   set to 0 for now.

   delay

   Specifies the time (in milliseconds) to wait before the input
   action.

   button_number

   Specifies which button is being acted upon.

   button_action

   Specifies the action to be performed (one of XTestPRESS,
   XTestRELEASE, or XTestSTROKE).

   The XTestPressButton function creates input actions to be sent
   to the the server. The input actions will be accumulated in a
   request defined by this extension until the request is full or
   the XTestFlush function is called. They will then be sent to
   the server. When the input actions are sent to the server, the
   input actions will cause the server to think that the specified
   button was moved as specified.

   The XTestPressButton function will return -1 if there is an
   error, and 0 otherwise.

XTestPressKey

   int XTestPressKey(Display *display, int device_id, unsigned
   long delay, unsigned int keycode, unsigned int key_action);

   display

   Specifies the connection to the X server.

   device_id

   Specifies which keyboard device was supposed to have caused the
   input action. This is a provision for future support of
   multiple (distinguishable) keyboard devices, and should always
   be set to 0 for now.

   delay

   Specifies the time (in milliseconds) to wait before the input
   action.

   keycode

   Specifies which keycode is being acted upon.

   key_action

   Specifies the action to be performed (one of XTestPRESS,
   XTestRELEASE, or XTestSTROKE).

   The XTestPressKey function creates input actions to be sent to
   the the server. The input actions will be accumulated in a
   request defined by this extension until the request is full or
   the XTestFlush function is called. They will then be sent to
   the server. When the input actions are sent to the server, the
   input actions will cause the server to think that the specified
   key on the keyboard was moved as specified.

   The XTestPressKey function will return -1 if there is an error,
   and 0 otherwise.

XTestFlush

   int XTestFlush(Display *display);

   display

   Specifies the connection to the X server.

   The XTestFlush will send any remaining input actions to the
   server.

   The XTestFlush function will return -1 if there is an error,
   and 0 otherwise.

Low Level Functions

XTestGetInput

   int XTestGetInput(Display *display, int action_handling);

   display

   Specifies the connection to the X server.

   action_handling

   Specifies to the server what to do with the user input actions.
   (one of 0, XTestPACKED_MOTION or XTestPACKED_ACTIONS;
   optionally 'or'ed with XTestEXCLUSIVE).

   The XTestGetInput function tells the server to begin putting
   information about user input actions into events to be sent to
   the client that called this function. These events can be read
   via the Xlib XNextEventfR function.

   The server assigns an event type of XTestInputActionType to
   these events to distinguish them from other events. Since the
   actual value of the event type may vary depending on how many
   extensions are included with an X11 implementation,
   XTestInputActionType is a variable that will be contained in
   the Xlib part of this extension. It may be referenced as
   follows:

   extern int XTestInputActionType;
     * An action_handling value of 0 causes the server to send one
       user input action in each XTestInputActionType event. This
       can sometimes cause performance problems.
     * An action_handling value of XTestPACKED_ACTIONS causes the
       server to pack as many user input actions as possible into
       a XTestInputActionType event. This is needed if user input
       actions are happening rapidly (such as when the user moves
       the pointer) to keep performance at a reasonable level.
     * An action_handling value of XTestPACKED_MOTION causes the
       server to pack only user input actions associated with
       moving the pointer. This allows the client to receive
       button and key motions as they happen without waiting for
       the event to fill up, while still keeping performance at a
       reasonable level.
     * An action_handling value with XTestEXCLUSIVE 'or'ed in
       causes the server to send user input actions only to the
       client. The effect on the server is as if the user had
       performed no input actions.
     * An action_handling value without XTestEXCLUSIVE causes the
       server to copy user input actions, sending one copy to the
       client, and handling the other copy normally (as it would
       if this extension were not installed).

   There are four types of input actions that are passed from the
   server to the client. They are:

   key/button~state~change

   This type of input action contains the keycode of the key or
   button that changed state; whether the key or button is up or
   down, and the time delay between this input action and the
   previous input action.

   pointer~motions

   This type of input action contains information about the motion
   of the pointer when the pointer has only moved a short
   distance. If the pointer has moved a long distance, the pointer
   jump input action is used.

   pointer~jumps

   This type of input action contains information about the motion
   of the pointer when the pointer has moved a long distance.

   delays

   This type of input action is used when the delay between input
   actions is too large to be held in the other input actions.

   The XTestGetInput function will return -1 if there is an error,
   and 0 otherwise.

   An error code of BadAccess means that another client has
   already requested that user input actions be sent to it.

XTestStopInput

   int XTestStopInput(Display *display);

   display

   Specifies the connection to the X server.

   The XTestStopInput function tells the server to stop putting
   information about user input actions into events. The server
   will process user input actions normally (as it would if this
   extension were not in the server).

   The XTestStopInput function will return -1 if there is an
   error, and 0 otherwise.

   An error code of BadAccess means that a request was made to
   stop input when input has never been started.

XTestFakeInput

   int XTestFakeInput(Display *display, char *action_list_addr,
   int action_list_size, int ack_flag);

   display

   Specifies the connection to the X server.

   action_list_addr

   Specifies the address of an list of input actions to be sent to
   the server.

   action_list_size

   Specifies the size (in bytes) of the list of input actions. It
   may be no larger than XTestMAX_ACTION_LIST_SIZE bytes.

   ack_flag

   Specifies whether the server needs to send an event to indicate
   that its input action buffer is empty (one of
   XTestFAKE_ACK_NOT_NEEDED or XTestFAKE_ACK_REQUEST).

   The XTestFakeInput function tells the server to take the
   specified user input actions and process them as if the user
   had physically performed them.

   The server can only accept a limited number of input actions at
   one time. This limit can be determined by the
   XTestQueryInputSize function in this extension.

   The client should set ack_flag to XTestFAKE_ACK_NOT_NEEDED on
   calls to XTestFakeInput that do not reach this limit.

   The client should set ack_flag to XTestFAKE_ACK_REQUEST on the
   call to XTestFakeInput that reaches this limit.

   When the server sees an ack_flag value of XTestFAKE_ACK_REQUEST
   it finishes processing its input action buffer, then sends an
   event with type XTestFakeAckType to the client. When the client
   reads this event, it knows that it is safe to resume sending
   input actions to the server.

   Since the actual value of the event type may vary depending on
   how many extensions are included with an X11 implementation,
   XTestFakeAckType is a variable that is contained in the Xlib
   part of this extension. It may be referenced as follows:

   extern int XTestFakeAckType;

   There are four types of input actions that are passed from the
   client to the server. They are:

   key/button~state~change

   This type of input action contains the keycode of the key or
   button that is to change state; whether the key or button is to
   be up or down, and the time to delay before changing the state
   of the key or button.

   pointer~motions

   This type of input action contains information about the motion
   of the pointer when the pointer is to be moved a short
   distance, and the time to delay before moving the pointer. If
   the pointer is to be moved a long distance, the pointer jump
   input action must be used.

   pointer~jumps

   This type of input action contains information about the motion
   of the pointer when the pointer is to be moved a long distance,
   and the time to delay before moving the pointer.

   delays

   This type of input action is used when the delay between input
   actions is too large to be held in the other input actions.

   The XTestFakeInput function will return -1 if there is an
   error, and 0 otherwise.

   An error code of \fIBadAccess\fR means that another client has
   already sent user input actions to the server, and the server
   has not finished processing the user input actions.

XTestQueryInputSize

   int XTestQueryInputSize(Display *display, unsigned long
   size_return);

   display

   Specifies the connection to the X server.

   size_return

   Returns the number of input actions that the server's input
   action buffer can hold.

   The XTestQueryInputSize function asks the server to return the
   number of input actions that it can hold in its input action
   buffer in the unsigned long pointed to by \fIsize_return\fR.

   The XTestQueryInputSize function will return -1 if there is an
   error, and 0 otherwise.

XTestReset

   int XTestReset(Display *display);

   display

   Specifies the connection to the X server.

   The XTestReset function tells the server to set everything
   having to do with this extension back to its initial state.
   After this call the server will act as if this extension were
   not installed until one of the extension functions is called by
   a client. This function is not normally needed, but is included
   in case a client wishes to clean up the server state, such as
   after a serious error.

   The XTestReset function will return -1 if there is an error,
   and 0 otherwise.
